index
Indupart
  0161 432 6655    sales@indupart.co.uk

The UK's leading supplier of
Industrial Doors & Door Components

Direct Drive
Roller Shutters
Print Page
Overview
The Indupart Direct Drive Roller Shutter requires no drive chain; no barrel tensioning and no isolator. This means that installation is much easier. And is also extremely safe. Indupartís technical team have compiled detailed installation instructions.

Design and Installation
Doors supplied upto 6500 mm W x 6500 mm H, flag guide set up as standard. No end plates. High quality pedestal bearings - the shaft does not run in direct contact with rough castings. Indupartís Direct Drive Roller Shutters are pre-wired for easy installation and include a 3 phase E & N inverter plug allowing polarity to be changed easily and safely. A 16 amp socket must be provided within 1 metre of the motor drive side of the door 1500 mm from finished floor level.
Motor Details
Industrial 3 Ph 230/400v motor.

Nominal current: 5.2/3 amps.

Motor protection class: IP54.

Duty rating: 60%.

Emergency hand chain (operable from floor level).

Fully pre-wired open/stop/close push button control.

Low level 24 volt control.

Auto close function.

Photocell connections.

Impulse and deadman operation.

Safety edge connections without additional relay.

Option of radio control with timed return.

 
 
indupart
Subscribe to our Mailing list for Exclusive Promotions and News
Manchester 0161 432 6655
Hemel Hempstead 01442 258653
Bristol 0117 967 4408
Glasgow 0141 774 8314
   
Email sales@indupart.co.uk
  For all depot addresses click here
 
Copyright Indupart © 2016 All Rights Reserved. No portion of this site may be reproduced or redistributed without prior written permission from Indupart
Registered in England and Wales Company Registration No. 2079486 VAT Registration No. 467 2425 36