0161 432 6655

The UK's leading supplier of
Industrial Doors & Door Components

Insulated Rolatherm
Print Page

Roller Curtain:
Curtain is constructed from 77mm steel lath, Galvanised finish. The lath is rolled in one section, which is injected with a foam core.
Please note: The insulated lath is not suitable for powder coating. Powder coating is done at customers own risk and will not be done through Indupart.

3 phase Guthrie Douglas direct drive motor pre wired with open/stop/close push button and 16 amp 3 phase e & n plug. Emergency manual chain over ride (change over and operation at floor level).

Bottom rubber seal and top brush seal. The guides come complete with neoprene brush seals mounted to both inner faces of the guide.
Bottom Rail:
A steel seal retainer complete with bottom ensure the door seals completely, thus eliminating draughts.

Side Guides & Guide Angles:
Aluminium guides with grey primer coated motor support bracket.

Roller Barrel:
Mild steel tube with diameter and wall thickness is used to achieve 1:400 deflection to suit each individual contract. Barrel is fitted with discs and shafts, mounted into bearing(s) and motor.

Roller Barrel Mounting:
Gantry brackets are fabricated from steel angle and steel flat bar. The motor and bearings sit in position on top of the brackets. Holes are pre-drilled to help obtain the correct offset from fixing face to the centre of the roller barrel.

Galvanised finish lath or standard plastisol colour from - Range below Available in galvanised finish or the following colours only: Olive Green, Van Dyke Brown, Merlin Grey, Solent Blue, White, Ocean Blue, Sargasso Blue, Poppy Red and Goosewing Grey. Galvanised finish lath.

IRSD GA Details

Subscribe to our Mailing list for Exclusive Promotions and News
Manchester 0161 432 6655
Hemel Hempstead 01442 258653
Bristol 0117 967 4408
Glasgow 0141 774 8314
  For all depot addresses click here
Copyright Indupart 2016 All Rights Reserved. No portion of this site may be reproduced or redistributed without prior written permission from Indupart
Registered in England and Wales Company Registration No. 2079486 VAT Registration No. 467 2425 36 - Website Designed by Create 8, Coded by Cypanet