0161 432 6655

The UK's leading supplier of
Industrial Doors & Door Components

Panoramic Overhead
Print Page Panoramic Colours
The aluminium anodized profiles which make up the panel are robustly dimensioned and accurately cut to form perfect joins. The window panels are formed using two acrylic sheets with an intermediate air gap of 15mm. The acrylic sheet material is 2.5mm thick. Recent rests to EN 530 procedure 2 indicate that our design of acrylic window maintains excellent transparency (classification 4), even after repeated cleaning at a relatively high hand pressure (12 kPa).

Door Head Gear
Sectional doors are counterbalanced to ensure the smooth running of doors using minimal effort. All counter balance spring calculations carried out by Indupart are designed to get the maximum life out of the door springs we manufacture (most typical loading dock doors are calculated to a minimum 50,000 cycles). The spring are high tensile helical wound steel, heat treated for improved performance. The springs are mounted on a steel shaft support by bearing brackets incorporating sealed bearing rollers to ensure free running of the shaft. Also mounted on the spring shaft are the cable drums, these carry the aircraft quality cables which have a 7:1 safety factor. These are looped and swagged using a hydraulic press to ensure the cables do not get detached from the cable drums or the brackets which connect the cables to the bottom of the door panels. Spring break devices are fitted to doors to comply with CE markings.
Panel Options
Polyester paint coating to the external and or internal face in an extensive range of colours.
Panel Hardware:
The roller carriers are adjustable and along with the intermediate panel hinges, are hot dipped galvanized steel. The rollers which run in the side track are sealed for life self lubricating bearings c/w a nylon tyre to give smooth and quiet operation mounted on a zinc plated steel shaft. The new design Indupart vertical lift loading dock door needs no adjustment, as it is sealed directly to the seal connected to the side fixing angle.

Guide Tracks:
The door tracks are galvanised steel ‘J’ type (designed to give free and easy running for bearing rollers) These are mounted on a galvanised steel jamb angle, for fixing purposes, via Indupart’s unique stud welding system which ensures the most effective seal to the building as the tracks need no adjustment on site.

Guide track options:
Guide tracks are individually manufactured to suit site conditions, taking into consideration door size, headroom and roof pitch, see ‘installation clearances’ for details.

All Indupart sectional doors are fuly perimeter sealed, including the intermediate panel seals, to provide the most effective weather seal to your door, All fixing faces, floors and lintels must be flush and square.

Indupart offer a range of manual automatic operations including a large number of safety features as options.

Other options:
As you would expect, Indupart offer a range of optional extras including, but not limited to, integral personnel doors in main door and door safety furniture.
Subscribe to our Mailing list for Exclusive Promotions and News
Manchester 0161 432 6655
Hemel Hempstead 01442 258653
Bristol 0117 967 4408
Glasgow 0141 774 8314
  For all depot addresses click here
Copyright Indupart © 2016 All Rights Reserved. No portion of this site may be reproduced or redistributed without prior written permission from Indupart
Registered in England and Wales Company Registration No. 2079486 VAT Registration No. 467 2425 36 - Website Designed by Create 8, Coded by Cypanet