Indupart

Return results

ROLLER SHUTTER COMPONENTS

00----

Galvanised steel 76mm (3") scrolled lath c/w 2 punched holes at each end to suit Indupart endlocks.
22, 20 and 18 swg galvanised steel laths, 22 and 20 swg perforated galvanised laths and 22 swg plastisol laths are also available, cut to length.
002235 - 22swg x 3500mm long 002035 - 20swg x 3500mm long
002240 - 22swg x 4000mm long 002039 - 20swg x 4000mm long
002245 - 22swg x 4500mm long 002050 - 20swg x 5000mm long
002250 - 22swg x 5000mm long 002060 - 20swg x 6000mm long
002255 - 22swg x 5500mm long 002065 - 20swg x 6500mm long
002260 - 22swg x 6000mm long 002075 - 20swg x 7500mm long
002265 - 22swg x 6500mm long 001880 - 18swg x 8000mm long

01000-

010000 - Nylon endlock to suit 76mm (3") Indupart lath. Rivets not included.
010004 - As above but for smaller coil.

010001

Cast steel endlock to suit 76mm (3") Indupart lath. Rivets not included.

010002ZP

Zinc plated windlock to suit 76mm (3") Indupart lath. Rivets not included.

020025

Galvanised steel 'T' bottom rail.
8000mm long.

020026

Galvanised steel 'L' bottom rail
8000mm long.

020027

Galvanised steel quirk strip.
8000mm long.

 

Copyright message

Tel: Manchester: 0161 432 6655   Hemel Hempstead: 01442 258653   Bristol: 0117 9633372  Glasgow: 0141 774 8314

Copyright Indupart © 2010 All Rights Reserved. No portion of this site may be reproduced or redistributed without prior written permission from Indupart

Registered in England and Wales Company Registration No. 2079486 VAT Registration No. 467 2425 36