Tube Operated Roller Shutter Door
Steel shutter for commercial applications. 77mm curved steel slats with galvanised finish as standard, optional plastisol or powder coated finishes are available on request.
Suitable for internal, external or reveal fit. A maximum size of 29m2 applies to tubular motor shutters, Direct Drive Roller Shutters can be offered for larger openings.
Electrically operated rolling shutter is operated via a 240V single phase tubular motor drive system. Emergency operation is via a manual hand crank fitted as standard.
75 mm curved galvanized steel interlocking laths with hard wearing nylon or steel end locks. The curtain is finished with an inverted ‘T’ section galvanized bottom rail.
65 mm x 32 mm x 2.5 mm straight galvanized channel sections. Formed end plates are attached to the top of the guide angles.
Constructed from high quality mild steel tube with an integral motor with supporting shafts.
Wall mounted key switch or rocker switch.
– Plastisol lath.
– Powder coating to our standard RAL or BS range.
– Perforated lath.
– Heavy duty ‘D’ section rubber bottom strip.
– Top brush strip.
– Remote control.